Barbell 2000 Power Barbell

This Powerlifting bar is equipped with the longest limited warranty that we offer for our barbells with 15 year coverage.

The Barbell Standard 2000 tensile strength is 206,000 PSI. Rated for up to 2,000 pounds static load, this powerlifting bar is sturdy and safe for your heaviest lifts.

As our IPF spec powerlifting bar, this bar offers our most aggressive medium knurl with powerlifting knurl marks and center knurl.

The sleeves and shaft are coated in corrosion-resistant and durable bright-zinc to maintain its performance and appearance over years of heavy use.

The Barbell Standard 2000 delivers a firm feel with minimal light whip, making it ideal for powerlifting, strength training, and any heavy lifting.

2" Olympic Men's Barbells are the most common type of barbell in most gyms and commercial facilities

• These barbells weigh 20kg (44 pounds) and measure 2.2 meters in length (about 86.6 inches, or 7'2.6")
• 28-29mm grip diameter (1.1" to 1.14")
• These are commonly referred to as "45 pound barbells" and "7 foot barbells"

2" Women's Barbells are another common barbell option found in home and commercial gyms. These barbells have most of the same specs as the Men's barbells but weigh less and are slightly shorter:

• These weigh 15kg (33lbs) and measure 2.01 meters in length (about 79.1 inches, or 6' 7.1")
• 25-28mm grip diameter (0.98" to 1.1")
• Commonly referred to as a "6 foot barbell" or a "35 pound barbell"

Youth barbells are the least common, weighing 10kg (22 pounds) and measuring 1.7 meters in length (66.9", or 5'6.9").

Best Barbells for Bench, Deadlift, and Squats

• 200k+ PSI tensile strength and less whip
• Rougher knurling with bronze bushings
• See our Barbell 2000

Best All-Purpose Barbells

• 180k-200k PSI tensile strength and moderate whip
• Lighter knurling. Bushings and needle bearings
• See our Barbell 1500

Best Beginner and Lighter Weight Barbells

• 160k-180k PSI tensile strength and moderate whip
• Light knurling. Bushings and bearings
• See our Barbell 1000

People primarily looking to do bench, squats, presses, rows, etc will be best served with a stiffer and slightly more aggressively knurled powerlifting bar. You'll want to target a barbell with 200k+ PSI tensile strength. The sleeves are best with bushings, since bearings can create more spin than preferred for these lifts. Often this bar will have only powerlifting knurl marks, as opposed to the dual marks indicative of an all-purpose bar.

Check out our Powerlifting Barbell 2000 to see our own powerlifting bar.

Yield and tensile strength both refer to the maximum load a barbell can support.

Yield strength measures the maximum stress a barbell can sustain before it will permanently bend. Tensile strength is the maximum stress a barbell can handle before it breaks. Tensile is always larger than Yield - steel will deform before it snaps.

Quality barbells will have 160,000 PSI tensile strength or higher, and all Barbell Standard barbells fit the bill.

Barbell sleeves are attached to the ends of the main barbell shaft where the weights are loaded. Quality barbell sleeves include bushings, bearings, or both between the bar and the sleeves to keep the rotation smooth and consistent. Without bushings or bearings, the barbell sleeves will grind on the shaft leading to an inconsistent spin.

Bronze bushings provide a slow, steady, and reliable spin for heavier and slower lifts like squat and bench press. They are typically preferred in a powerlifting barbells, like our Powerlifting Barbell 2000 which are equipped with self lubricating bronze bushings to provide a slow and reliable spin for years to come.

Needles bearing are often preferred for olympic barbell lifting routines because they provide a quicker and more responsive spin for these explosive and technical lifts. Our Olympic Barbell 1500 is equipped with both needle bearings and bronze bushings to deliver an exceptional lifting experience, while our and Compact Barbell 1000 comes with integrated needle bearings.

The reason finish is applied to barbells is to prevent rust. The choice of finish will also impact the feel and grip of the barbell on your hands. Bare steel bars require continual maintenance though they are typically the most cost effective option you can find.

Black oxide finish is the next most economical option, but it offers only a slight improvement in rust prevention vs bare steel because it is only a fine oxide layer which can be easily scratched which allows rust to settle in and spread.

Zinc coating is a popular option for the excellent combination of rust protection and grip. Zinc has better rust protection than oxide and cerakote alternatives without substantially impacting grip.

Stainless steel is the most expensive option and offers the highest corrosion resistance and maintains a feel similar to bare steel.

Whip measures how much and how easily a barbell can flex without permanently bending. The more whip a bar has the more the bar will flex with momentum. Many factors influence how much whip a bar has, but the main factors are the material a barbell is made with and the diameter of the bar.

Stiffer barbells with less whip, like our Powerlifting Barbell 2000, are typically preferred for the core lifts that are most common exercises for home gym lifters, like bench, deadlines, squats, etc.

More whip is typically preferred for lifters that plan to focus on the highly technical explosive Olympic lifts like clean and jerk, power cleans, and snatches. Our Olympic Barbell 1500 is an example a higher whip barbell.

Barbell sleeves are attached to the ends of the main barbell shaft where the weights are loaded. Quality barbell sleeves include bushings, bearings, or both between the bar and the sleeves to keep the rotation smooth and consistent. Without bushings or bearings, the barbell sleeves will grind on the shaft leading to an inconsistent spin.

Bronze bushings provide a slow, steady, and reliable spin for heavier and slower lifts like squat and bench press. They are typically preferred in a powerlifting barbells, like our Powerlifting Barbell 2000 which are equipped with self lubricating bronze bushings to provide a slow and reliable spin for years to come.

Needles bearing are often preferred for olympic barbell lifting routines because they provide a quicker and more responsive spin for these explosive and technical lifts. Our Olympic Barbell 1500 is equipped with both needle bearings and bronze bushings to deliver an exceptional lifting experience, while our and Compact Barbell 1000 comes with integrated needle bearings.